Is Media Biased

Is Media Biased Al – Jazeera TV is Biased in its Reporting The emergence of technology that facilitates a comprehensive coverage of news in real-time has enabled many media outlets to reach millions of viewers globally. The modernization of the media industry has also escalated live streaming of news online.Advertising We will write a custom essay sample on Is Media Biased specifically for you for only $16.05 $11/page Learn More It is notable that the sovereignty, autonomy, and information over personal analysis determine the level of news coverage objectivity. However, some media outlets have failed the objectivity test because of their partiality when it comes to reporting certain events. This paper discusses the notion that some media outlets are biased and focuses the debate on the Al –Jazeera Television. Al – Jazeera is the largest media outlet in the Middle East reporting events mostly to the Arab world. Presently, Al – Jazeera has also exp anded to the Western world. Notably, individuals in the private sector own and run the media outlet. The media outlet is insensitively anti – Israel and America. Al – Jazeera tend to report events involving Arabs and Islam positively and objectively. However, it has remained deeply against the Western ideals in its reporting of conflicts. The way it covers news in which the Western nations are involved normally shows a bias. This has been noted in its one-sidedness, unequal presentation, and unreasoned opinion on its commentaries. It is notable that countries such as Algeria, Morocco, and Bahrain among others have alleged that Al – Jazeera is biased in its reporting of events. The media outlet’s leniency towards Iraq has been evident in its reporting. The media outlet reported anti – occupation aggression news in Iraq, which received global condemnation. In fact, the media outlet appears to be facilitating a psychological conflict with its fundamen talist opinions. Al – Jazeera normally report news about the search for democracy in some Arab countries experiencing revolution. The media outlet has equated revolutions in Egypt and Libya with the ejection of totalitarianism in the search for political order. However, Al – Jazeera fails to report the lack of democracy in Qatar. For example, Qatar does not conduct elections and the citizenry have no basic political rights. This is an indication of bias because it delivers sensational reports about problems in other countries without projecting to the world the challenges facing Qatar.Advertising Looking for essay on communications media? Let's see if we can help you! Get your first paper with 15% OFF Learn More The unbalanced reporting of the war in Syria has also generated massive problems for the media house. This was occasioned by the resignation of some reporters over the media outlet’s lack of objectivity. The media outlet reported the revolutionary activities that occurred in Egypt and Libya. However, it has reported nothing about the serious anti – government uprising activities occurring in Bahrain. The media outlet is allegedly forcing its reporters to twist their stories to conform to the ideals of Emir Sheik and his Qatar administration. Furthermore, Al Jazeera has occasionally turned down stories, which are thought to be against the Qatari government brought by its journalists, Al – Jazeera has created the notion that it is serving Emir Sheik’s personal agenda by failing to report on the role played by the Qatar leader in the Syrian war. In fact, many former employees contend that Al – Jazeera has degenerated into a propaganda platform. The former reporters have indicated that Al – Jazeera has deviated from its mission goals. The media out let was originally the voice for transformation agenda and objective criticism of political activities in the region. The former workers argue that Al –Jazeera presently represents the views of the Qatari leadership particularly reporting in a lopsided manner when it comes to issues that require objectivity.

This essay compares the writing styles of Edgar Allen Poe and Washington Irving in relation to the atmospheres in which they grew up.

This essay compares the writing styles of Edgar Allen Poe and Washington Irving in relation to the atmospheres in which they grew up. Washington Irving and Edgar Allen Poe's writing contain many similarities, both writers being from the Romantic Era. There are also a few differences in their styles that distinguish then from each other. Their extremely different backgrounds and life styles growing up is a reason for their different outlooks on life, therefore leading to different ways of expressing their selves.Washington Irving was born into a very wealthy family. Born in New York City, he began studying law, but feeling that it was not the right path for him, dropped it and started to travel Europe. He lived there for almost twenty years and studied European folklore and culture. As a young man, Irving spent a lot of time vacationing in Westchester and northern New York, where a few of his writings take place.Having such an easy lifestyle and being of wealthy background, Irving had no reason to obsess over the bad aspects of life.English: Looking southeast at bust of Washington I...This led to his upbeat and some times humorous literature. Irving's literature is easy reading and never contains anything to serious or depressing. For instance, in his short story The Legend of Sleepy Hallow, He tells of a man who is a schoolteacher, and in so many words tells that he often gets back at the children that bullied him while he was attending grade school. As an adult, the main character, Ichabod Crane is still being tormented by the kind of person he was bothered by when he was young. During the course of the story he is taunted and teased by the his bully, Brom Bones, who eventually scares him so much nobody hears from Ichabod again. Normally, this would seem tragic, but the way that Irving tells the story, it seems funny.Poe had an extremely different childhood and situation...

Design a multi-story reinforced concrete office building Essay

Design a multi-story reinforced concrete office building - Essay Example The building is to consist of a 30 people meeting suite/conference, a restaurant, different sizes common room on the 3 floors of the building. Ground floor will consist of, conference room, restaurant, common room and all services associated. The remaining unused floor is aimed for facilities of leisure. 3.0 General Approach The general approach taken is to obtain the architecture of an office building:- Acquiring design of an office architecture of a multi-storey building basically adopted in the construction design (Alheyad, 2008). . Structural system establishment of the floors from the ground to first, second and third floor Foundation type, column design and system of resisting wind will be affected by taking into consideration the architectural drawings 4.0 Requirements for design Client’s requirements: The ground floor is to have: a reception, conference/meeting rooms, common room and entertainment room, a restaurant, and associated services. The remainder of the floor is to be occupied by the swimming pool. The main building is to include a small scale conference/meeting suite of a maximum 30 persons, a restaurant, a common room, as well as lodging. The minimum clear height for the ground floor is set to be3.0 m. The minimum spacing of vertical structural elements within the ground floor is to be 6.0 m. Access to bedrooms at the 1st and 2nd floor and the 3rd floor is by lifts or staircases located at the centre and end of the floors. The 1st and 2nd floor are different size offices with central access corridors. The floor upon completion will have a soffit height at the 1st and the 2nd floor of a minimum of 3.0 m in the floors and 3.6m in corridors, in addition to services allowance. All servicing plant including water tanks, heating boilers and lift mechanisms are to be located on top of the stair/lift towers at the ends of the building. Car parking of 450m^2is to be set near the hostel at ground level over an area of approximately 450 m2. There is need for allowance for future adjustments in demand for different types of services. This is achieved through structural arrangement not compromising the ability to adjust the width and mix of room compartments, though the central corridor arrangement will not be altered as per the client decision. A fire resistance period of 2hrs is to be put in the building. The building is to be exposed to XC-1 environment. Building requirements analysis The two-hour fire resistance requirement is vital in for the structural elements design of the building. According to Euro code 2, for two-hour fire resistance, the minimum width of a beam is 200 mm. The XC-1 environment that the building is exposed to implies the structure is always exposed to water or is dry. To attain this condition a minimum cement 240 kg/m3 for exposure to XC-1 together with a ratio of 0.07 environmental conditions. The set minimum cover for XC-1 environment is cmin = 15 m .This is calculated using the equation Cnom = Cm in + ?C, where Cnom is the nominal cover. (Eurocode 2). 5.0 Structural elements These are framing elements used to transfer the loads from the building to

Week2 Essay Example | Topics and Well Written Essays - 250 words - 1

Week2 - Essay Example diary or separate company is the most appropriate strategy as opposed to a branch because the mother company can transfer financial assistance to the separate company from a foreign financial institution in form of grant loans, which is not possible when labelled as branch office. Besides, the separate subsidiary would be able to return the financial favour in form of dividend or loyalty hence minimizing tax obligations(Barney, 2008; PWC, 2008). The IRS has their own strategies of detecting whether a corporation is remitting appropriate amount of tax either through office or field examination. The filed examiners would visit the business strategy and determine the amount of tax payable. During such visits, they conduct auditing interviews and running tax reports(Barney, 2008; PWC, 2008). If the addition tax is found, the team will inform the corporation and require them to sign the tax report. However, the corporation may decide to decline signing until they go through the report and verify the details. The tax policy is not prohibiting foreign investment but rather enhancing transparency in financial dealing. The USA tax policy especially on the transfers, states that every exchange of property must be subjected to taxation under the section 351 and 361(Barney, 2008; PWC, 2008). The corporations are required to declare in the form what details of the property is

A Tragic Hero in Aristotle Definition Essay Example for Free

A Tragic Hero in Aristotle Definition Essay The word tragedy is when an event ends in misfortune. However, when the word tragedy is put in context within a play or a story it is a story circling around a protagonist who is of high power and stature. A tragedy is usually the development of a protagonist whose in conflict with a more superior force; the superior forces that the protagonist could be faced with is his destiny, free will and the Gods that rule over them. The end of a tragedy is usually the protagonist whose in a state of deterioration in which he loses everything. A tragic hero is meant to define his fate by himself, usually by actions that he inflicts on himself which then lead him to wreck his own life. Aristotle is considered as one of the many ancient influential philosophers there is and therefore his view of Oedipus being an ideal tragic hero is considered as highly powerful in the world of literature. Aristotle defines tragedy as the conflict between humans being good yet being defeated by reality as their actions done with good intentions can actually bring back outcomes that were not initially wanted. In the play Oedipus by Sophocles, Oedipus is classed as a classic tragic hero by Aristotle for many of the characteristics he possesses. According to Aristotles definition of a tragic hero; the tragic hero has to be realistic, true to life, consistent and true to themselves, consistent within the context of the narrative and has to make errors of judgement throughout the play but the results of what has been done should be the opposite of what was initially intended. A tragic hero should be able to arouse feelings of pity and fear; this is because, the feeling of pity is aroused by our deep sympathy for someone whose life is falling out of place whereas that person is neither too good nor too evil to have deserved such a misfortune, and the feeling of fear is aroused by the sheer horror that such a tragedy can fall upon anyone regardless of their stature. According to Aristotles definition Oedipus is a tragic hero because he is a man of great power and influence over the city he rules and his life begins to deteriorate in front of everyones eyes as he goes on a quest to find out who he is. Aristotle says that a tragic hero must be the one to cause their own downfall in which Oedipus persistently decides to carry on asking questions about his origins. Also, the tragic heros fate is not deserved and his punishment exceeds his wrongdoings and  that a tragic hero must be someone important and influential and he must be someone who makes an error of judgement. This error of judgement is seen when Oedipus forces Tiresias in anger to answer his questions of who his parents are, â€Å"Who? Wait; who are my parents?†, it is Oedipuss own mistake in forcing answers in which he does not wish to hear or know.

Padre Pio :: essays research papers

Padre Pio, whose real name was Francesco Forgione was born on May 25, 1887 in Pietralcina, a small town in southern Italy. Every since he was a child he has always showed love towards the religious life. It is said that at the age of 5 Padre Pio had already dedicated his life to God. He had an extreme love for prayer. At the age of sixteen he entered the ‘Capuchin Friars’ which are a religious order in memory of St. Francis of Assisi. From the first time Padre Pio had entered into the Friary he was already recognized by his teachers as someone special. â€Å"There was something which distinguished him from the other students, whenever I saw him he was always humble and silent†, one of his peers had said. What struck them most was Padre Pio’s love for prayer. In the year 1910 at the age of 23 Padre Pio had been ordained a priest.   Ã‚  Ã‚  Ã‚  Ã‚   Besides the Mystery of God taught by Padre Pio, he had his own mysteries. After celebrating a Mass on September 20, 1918, he had received the â€Å"Stigmata†. His hands, side and feet were scarred with the same wounds of Christ; he was the first priest ever to have received the gift of Stigmata along with other gifts which later declared him a Saint. The news of this spread all over the world and people flocked to witness this miracle. Scientists had examined the wounds over and over but could never come up with an explanation. He had performed many miracles which included curing a blind little girl without pupils in her eyes to see again, and she is still alive today to tell her story. Padre Pio was also rewarded by God with other magnificent gifts such as bilocation which was Padre Pio’s ability to visit and needy in far places from where he was without ever leaving, also the gift of perfume which was the beautiful odor of roses that marked Padre Pio’s presence , and the gift of conversion which was his ability to make remarkable conversions of peoples choices or views.   Ã‚  Ã‚  Ã‚  Ã‚   Throughout the life of Padre Pio, God was no mystery to him because it seemed as if he already knew the mystery of God. He once said â€Å"the pivot of perfection is love, he who lives in love lives in God, because God is love, as taught by the apostles†, which simply those who do not love cannot be completely connected to God.

Personal protective equipment Essay

PERSONAL PROTECTIVE EQUIPMENT Hazards exist in every workplace in many different forms: sharp edges, falling objects, flying sparks, chemicals, noise and a myriad of other potentially dangerous situations. Controlling a hazard at its source is the best way to protect employees. Depending on the hazard or workplace conditions, the use of engineering or work practice controls to manage or eliminate hazards to the greatest extent possible. When work practice and administrative controls are not feasible or do not provide sufficient protection, employers must provide personal protective equipment (PPE) to their employees and ensure its use. Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer’s body from injury and other hazards. The Requirement for PPE To ensure the greatest possible protection for employees in the workplace, the cooperative efforts of both employers and employees will help in establishing and maintaining a safe and healthful work environment. In general, employers are responsible for: ââ€"   Performing a â€Å"hazard assessment† of the workplace to identify and control physical and health hazards. ââ€"   Identifying and providing appropriate PPE for employees. ââ€"   Training employees in the use and care of the PPE. Maintaining PPE, including replacing worn or damaged PPE. ââ€"   Periodically reviewing, updating and evaluating the effectiveness of the PPE program. Employees should: ââ€"   Properly wear PPE, ââ€"   Attend training sessions on PPE, ââ€"   Care for, clean and maintain PPE, and ââ€"   Inform a supervisor of the need to repair or replace PPE. The hazard assessment should survey of the facility to develop a list of potential hazards in the following basic hazard categories: ââ€"   Impact, ââ€"   Penetration, ââ€"   Compression (roll-over), ââ€"   Chemical, ââ€"   Heat/cold, ââ€"   Harmful dust, ââ€"   Light (optical) radiation, and ââ€"   Biologic. In addition to noting the basic layout of the facility and reviewing any history of occupational illnesses or injuries, things to look for during the survey include: ââ€"   Sources of electricity. ââ€"   Sources of motion such as machines or processes where movement may exist that could result in an impact between personnel and equipment. ââ€"   Sources of high temperatures that could result in burns, eye injuries or fire. ââ€"   Types of chemicals used in the workplace. ââ€"   Sources of harmful dusts. ââ€"   Sources of light radiation, such as welding, brazing, cutting, furnaces, heat treating, high intensity lights, etc. ââ€"   The potential for falling or dropping objects. ââ€"   Sharp objects that could poke, cut, stab or puncture. ââ€"   Biologic hazards such as blood or other potentially infected material. Some of the most common types of eye and face protection include the following: ââ€"   Safety spectacles. These protective eyeglasses have safety frames constructed of metal or plastic and impact-resistant lenses. Side shields are available on some models. ââ€"   Goggles. These are tight-fitting eye protection that completely cover the eyes, eye sockets and the facial area immediately surrounding the eyes and provide protection from impact, dust and splashes. Some goggles will fit over corrective lenses. ââ€"   Welding shields. Constructed of vulcanized fiber or fiberglass and fitted with a  filtered lens, welding shields protect eyes from burns caused by infrared or intense radiant light; they also protect both the eyes and face from flying sparks, metal spatter and slag chips produced during welding, brazing, soldering and cutting operations. ââ€"   Laser safety goggles. These specialty goggles protect against intense concentrations of light produced by lasers. The type of laser safety goggles an employer chooses will depend upon the equipment and operating conditions in the workplace. ââ€"   Face shields. These transparent sheets of plastic extend from the eyebrows to below the chin and across the entire width of the employee’s head. There are many types of hard hats available in the marketplace today. In addition to selecting protective headgear that meets standard requirements, employers should ensure that employees wear hard hats that provide appropriate protection against potential workplace hazards. It is important for employers to understand all potential hazards when making this selection, including electrical hazards. This can be done through a comprehensive hazard analysis and an awareness of the different types of protective headgear available. ââ€"   Class A hard hats provide impact and penetration resistance along with limited voltage protection (up to 2,200 volts). ââ€"   Class B hard hats provide the highest level of protection against electrical hazards, with high-voltage shock and burn protection (up to 20,000 volts). They also provide protection from impact and penetration hazards by flying/falling objects. ââ€"   Class C hard hats provide lightweight comfort and impact protection but offer no protection from electrical hazards. ââ€"   Leggings protect the lower legs and feet from heat hazards such as molten metal or welding sparks. Safety snaps allow leggings to be removed quickly ââ€"   Metatarsal guards protect the instep area from impact and compression. Made of aluminum, steel, fiber or plastic, these guards may be strapped to the outside of shoes. ââ€"   Toe guards fit over the toes of regular shoes to protect the toes from impact and compression hazards. They may be made of steel, aluminum or plastic. ââ€"   Combination foot and shin guards protect the lower legs and feet, and may be used in combination with toe guards when greater protection is needed. ââ€"   Safety shoes have impact-resistant toes and  heat-resistant soles that protect the feet against hot work surfaces common in roofing, paving and hot metal industries. The metal insoles of some safety shoes protect against puncture wounds. Safety shoes may also be designed to be electrically conductive to prevent the buildup of static electricity in areas with the potential for explosive atmospheres or nonconductive to protect workers from workplace electrical hazards. ââ€"   Leather gloves protect against sparks, moderate heat, blows, chips and rough objects. ââ€"   Aluminized gloves provide reflective and insulating protection against heat and require an insert made of synthetic materials to protect against heat and cold. ââ€"   Aramid fiber gloves protect against heat and cold, and abrasive-resistant. ââ€"   Synthetic gloves of various materials offer protection against heat and cold, cut and abrasive-resistant and may withstand some diluted acids. These materials do not stand up against alkalis and solvents. Protective clothing comes in a variety of materials, each effective against particular hazards, such as: ââ€"   Paper-like fiber used for disposable suits provide protection against dust and splashes. ââ€"   Treated wool and cotton adapts well to changing temperatures, is comfortable, and fire-resistant and protects against dust, abrasions and rough and irritating surfaces. ââ€"   Duck is a closely woven cotton fabric that protects against cuts and bruises when handling heavy, sharp or rough materials ââ€"   Leather is often used to protect against dry heat and flames. ââ€"   Rubber, rubberized fabrics, neoprene and plastics protect against certain chemicals and physical hazards. When chemical or physical hazards are present, check with the clothing manufacturer to ensure that the material selected will provide protection against the specific hazard. Some types of hearing protection include: ââ€"   Single-use earplugs are made of waxed cotton, foam, silicone rubber or fiberglass wool. They are self-forming and, when properly inserted, they work as well as most molded earplugs. ââ€"   Pre-formed or molded earplugs must be individually fitted by a professional and can be disposable or reusable. Reusable plugs should be cleaned after each use. ââ€"   Earmuffs require a perfect seal around the ear. Glasses, facial hair, long hair or facial  movements such as chewing may reduce the protective value of earmuffs.